[Top] [All Lists]

Re: [Shop-talk] OT - TR2 or TR3 question

To: "'Shop Talk'" <>
Subject: Re: [Shop-talk] OT - TR2 or TR3 question
From: Jack Brooks <>
Date: Fri, 13 Jun 2014 22:45:22 -0700
References: <>
Thread-index: Ac+HM35a4LMfI6Y/SEa8cvW+yeB6gwAXyGdA FILETIME=[E0874F20:01CF8793]

I measure 1.125" on my 1960 TR3A (TS60,xxx), although I do have some serious
internal conflicts with helping out an MG racer.  <grin/sarcasm>

This was measured on the car and it's all deep under the windshield, but
that number should be pretty darn close.  


-----Original Message-----
From: Shop-talk [] On Behalf Of
Sent: Friday, June 13, 2014 9:32 AM
To: Shop Talk
Subject: [Shop-talk] OT - TR2 or TR3 question

Off Topic question. 

Anyone have a TR2 or TR3? I am wondering if the dash mounted rear view 
mirror might fit my MGA. If you could reply with the distance-apart of 
the mirror mounting holes I can decide if that mirror is a viable 
option for me. 

The reason I ask is I am vintage racing my MGA. Part of the roll bar is 
right above the rear toneau panel. The stock MGA mirror does not give 
me a good view behind me. The TR2-TR3 mirror has a much longer stem and 
should enable me to see over the bar. 

Eric Russell
Mebane, NC

<Prev in Thread] Current Thread [Next in Thread>