I have a Bosch saber saw, and their blades are nice. They make fine
toothed metal blades that work fine for fairly thick sheet metal. But you
will probably wear them out quick: they have only about an inch worth of
teeth on them...
> On Mon, Jun 3, 2013 at 12:11 PM, Elton E. (Tony) Clark <
> eltonclark@gmail.com> wrote:
>
>> Saber saws can do that chore. A variable speed unit will allow one to
>> select an optimal speed to suit the blade and metal. Use good quality
>> metal cutting blades but don't be afraid to try some of the coarser blades
>> for wood; I once broke my last metal cutting blade and finished a job
>> with
>> a wood-type blade that cut much better but vibrated and danced around
>> a
>> lot . . Good Luck.
>> Tony
_______________________________________________
Shop-talk@autox.team.net
Archive: http://www.team.net/archive
|