[Top] [All Lists]

Re: [Shop-talk] Inexpensive framing nailer/compressor

To: Dave C <>
Subject: Re: [Shop-talk] Inexpensive framing nailer/compressor
From: Jim Stone <>
Date: Wed, 27 Feb 2013 07:26:29 -0600
Cc: shop talk <>
References: <COL002-W54D08BDBCEE511CEAF8BEDCCFC0@phx.gbl>, <> FILETIME=[0D480A00:01CE14EE]
Thanks guys.  I have a bit of time, so I will keep my eyes open (and maybe
stop by a pawn shop or two) and try to find something better than HF and keep
that as a fallback if I run out of time.

> Date: Tue, 26 Feb 2013 19:54:52 -0800
> From:
> To:
> CC:
> Subject: Re: [Shop-talk] Inexpensive framing nailer/compressor
> I got a little twin tank compressor from Harbor Freight which seems to
> work ok.  For a nailer, I got a used Hitachi NR83A2 from a pawn shop;
> they had a bunch of them and I got the best looking one. That's the only
> nailer I ever seem to see the guys on framing crews use and they seem
> totally bulletproof.  It's also easy to get parts and nails for them.
> On 2/26/2013 12:30 PM, Jim Stone wrote:
> > I would like to buy a framing nailer.  I dont want to spend a lot as this
> > not something I will use often, but after recently borrowing one I realize
> > nice they are when needed.  I would like to keep the total costs under
> > and I am weighing my options.  Does anyone here have any recommendations?
> > could certainly buy new at HF and keep within my budget, but would want
> > know that someone else had bought one and found it ok.
> > Thanks.
> > _______________________________________________
> >
> >
> > Donate:
> > Suggested annual donation  $12.96
> > Archive:
> > Forums:
> > Unsubscribe/Manage:

<Prev in Thread] Current Thread [Next in Thread>