I thought about that, but this GMC uses the radio speakers for the chime.
It also is every other chime (lights, door open, etc) which I still
wanted.
Here is what I did. I disconnected the battery and rang out all the wires
on the key. There were two wires by themselves that has no connectivity
without the key and a closed circuit with the key in the switch. BINGO. I
cut one of the wires and all is well!
Eric P
"Be as beneficent as the sun or the sea, but if your rights as a rational
being are trenched on, die on the first inch of your territory." Ralph
Waldo Emerson
Peter Murray <peterwmurray@gmail.com>
Sent by: shop-talk-bounces@autox.team.net
01/08/2013 19:36
To
Shop-Talk List <shop-talk@autox.team.net>
cc
Subject
Re: [Shop-talk] Ignition switch
That was a problem I solved in my 2005 Subaru Outback by finding the
source
of the beep, drilling into the box that contained the sounder and applying
a bit of RTV to the open side of the sounder so it is much quieter.
-Peter
> "
_______________________________________________
Shop-talk@autox.team.net
Archive: http://www.team.net/archive
|