shop-talk
[Top] [All Lists]

[Shop-talk] Identifying taper and threading attachments on a

Subject: [Shop-talk] Identifying taper and threading attachments on a
From: TR3driver at ca.rr.com (Randall)
Date: Fri, 21 Oct 2011 08:53:52 -0700
References: <mailman.18.1318960808.11683.shop-talk@autox.team.net><1B9FB4B4C85C43988CF6533A293A8F6D@EnergyKinetics.EKnet><65884CFF6F01482B99CD50CD5947BC69@HP62011><7520E99DCA554F72827DAE1E259B3768@EnergyKinetics.EKnet><B8677E2507954B69BD9E4BD02B86E23F@HP62011><4E9F8126.3000707@frontier.com><053901cc8eed$60943220$0501a8c0@randall> <4EA14BD4.5000009@talktalk.net>
> The other thing I have done on light threads is to run the lathe 
> backwards

Not a good idea if your chuck screws onto the headstock (as mine does).

-- Randall  

<Prev in Thread] Current Thread [Next in Thread>