Northern Tool has their 1/2-inch RapidAir master kit on sale.
http://www.northerntool.com/shop/tools/product_200367525_200367525
Randy
> Date: Wed, 3 Aug 2011 20:13:43 -0400
> From: hillman@planet-torque.com
> To:
shop-talk@autox.team.net
> Subject: [Shop-talk] Compressed Air Lines, RapidAir
>
> Unbelievably to me, I searched the shop-talk archives, and found not
>
one mention RapidAir products ( ie RapidAir, Duratec, Maxline ).
>
>
http://www.rapidairproducts.com/index.asp
>
> I refuse to believe that I've
found something no here knew about, so...
> comments? Experience? I'm
considering installing the Maxline (3/4")
> system, because the original
RapidAir is only 1/2" and apparently rated
> for 150psi. I may or may not buy
the 175 psi compressor I'm looking at,
> but it seems silly to save a few
bucks here.
>
> Thanks.
>
> --
> David Hillman
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|