I bought a pair of the hoists that Harbor Freight sells. They are very
similar if not identical to the ones shown in the Amazon link that has
been posted. I found them to be real finicky to get both hooks aligned
on the bike and keep them hooked properly while hoisting. But, I found a
way to fix it. I used a piece of 2x2 as a spreader and mounted the hook
assemblies to each end. With this I can easily hook the handlebars and
seat with one hand and and maintain tension with the rope in the other
hand. Once the hooks are set properly, up she goes. I cut one end of
the spreader on an angle so that the handlebars are turned a bit when
lifted. Then the handlebars will fit between my scissor trusses and the
bike can go higher.
Cheers,
Kurt O.
> On 06/08/2011 08:28:52 AM, Tim wrote:
>> In order to have more space, I took the wall down between my SHOP and
>> garage space--wish I had done this when we bought the place five years
>> ago!!! The one thing I lost in the process was the wall space where I
>> was hanging our four bicycles. I am thinking about hanging them from
>> the
>> rafters in the SHOP space as well as above the garage space.
>>
>> Any one out there use or design something I can use? It has to be 100%
>> reliable as some of the garage space is taken up by two Datsun
>> Roadster
>> that would not be happy if a bike fell on them.
>>
>> Thanks
>>
>> Tim
>> Belleville, WI.
>> '70 SPL AND SRL
|