A few years ago our shower suddenly started having very low hot water flow. I
checked everything and could find no reason. Finally, when I took apart the
valve cartridge assembly, I found a little glob of solder that had apparently
made its way up the pipes from some over-soldered joint.
Fortunately the
cartridge was easy to take apart, but if it had been an old style faucet
valve, I would have had to unsolder the valve to remove the blockage.
Doug
--- On Wed, 1/27/10, John T. Blair <jblair1948@cox.net> wrote:
>
> Anyone
have any other ideas? I really don't want to
> have to pull & replace the
>
cut off valve, but I think that may be my next step.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.96
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|