At 09:16 PM 10/2/2009, Brad Kahler wrote:
>The nice barn that came with our new property in Kentucky has a
large loft that
>we plan on using for parts storage. Everything from fenders to
engine blocks
>and anything in between. I'm looking for ideas as to what would
work best for
>hoisting the heavier items up to the loft.
>
>The hoist will be used inside the barn and will need to lift from
barn floor to loft
>floor about 10 feet or so. I used to have a chain fall but it took
SO long to
>perform that type of lift that I'm hoping something better and faster can be
>found, preferably non-electric.
Brad,
Unfortunately, you're talking a wide range of weights here, a fender and an
engine block.
Also there is a thing called mechanical advantage which allows you to move
something you can't do by yourself. :) The problem with that is that as you
get more advantage you give up something. So for lifting a 400# engine block
how much can you lift/pull. If you say 50#, then you're looking for a wench
(block and tackle or chain fall) with gives you 8x mechanical advantage. The
down side is you'll have to pull 8x the distance.
So you may want a couple of pully systems. 1 being a good chain fall for
lifting heavy items like an engine. You may also want a rope block and tackle
with a mechanical of 1 or 2x to lift light things like the fender.
Then next question is, does the barn have the structrural support to
support the
chain fall? You could build or buy an I beam on rollers that you
could position
over the opening to attach the block and tackle to, or you could
build something
perminate into the walls and roof structure.
Finally, you'll need a hole in the floor and possibly a way to safely
cover it when
not lifting something up through it. So you'll probably need to cut
at least one
ceiling/floor joist to make it wide enough. I'd suggest that you
make the joist(s)
removable, so that when you're done, you can reinstall them and close the door
over them. Now you can safely walk or move things over that area.
Finally, depending on how much heavy stuff you put up there, you might need to
put some reinforcing columns in on the 1st floor of the barn to
support the weight
in areas of the 2nd floor, depending on how large the span is across the barn,
and how much weight you concentrate in one area - like are all the
engines going
in one area?
John
John T. Blair WA4OHZ email: jblair1948@cox.net
Va. Beach, Va
Phone: (757) 495-8229
48 TR1800 48 #4 Midget 65 Morgan 4/4 Series V (B1106)
75 Bricklin SV1 (#0887) 77 Spitfire 71 Saab Sonett III
65 Rambler Classic
Morgan: www.team.net/www/morgan
Bricklin: www.bricklin.org
If you can read this - Thank a teacher!
If you are reading it in English - Thank a Vet!!
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|