On Wed, Apr 29, 2009 at 10:52:37AM -0500, Arvid Jedlicka wrote:
> I have a Razor heater in the garage and the small fan motor that blows air
> over the heat exchanger has gone walk-about. It is a 115 volt 1550 RPM motor
> that draws 1.2 amps, four 1/8 inch mounting screws 2 inches apart - a square -
> on the drive face for mounting and a 3/16 inch diameter by 3 1/2 inch long
> shaft for the fan blade.
>
> I can provide all of the A. O. Smith motor plate details if that would help.
>
Have you checked A. O. Smith's catalog?
http://www.aosmithmotors.com
Jimmie
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|