Try copper mesh (think copper window screen material), and be sure to
ground it.
On Tue, Dec 9, 2008 at 12:13 PM, <nogera2@att.net> wrote:
> I ran a second cable from the DVR in my home office to the guess bedroom
> (where I like to nap) and hooked up a remote control relay which converts
> the IR from the remote control to a radio signal which is sent to a recover
> at the DVR and converts it back to a IR signal. It works so wonderfully that
> my wife wanted me to do the same between the den DVR and the master bedroom
> so she could watch her shows in either room. And now that's the problem.
> Even though the two relays are different brands they are broadcasting on the
> same frequency so if she uses the remote in the master bedroom the channel
> changes in my home office. What I need is to block the signal from her
> transmitter to my receiver. We don't have the same problem with my
> transmitter to her recover since it is further away. As luck would have it
> the receivers are in opposite ends of the house so if I could make the
> receiver antennas directional it would solve the problem.
> I tried aluminum foil and that didn't work. Any suggestions as to how to
> make the antennas directional?
>
> Bob Nogueira
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> You are subscribed as jdinnis@gmail.com
>
> Shop-talk mailing list
>
> http://autox.team.net/mailman/listinfo/shop-talk
>
> http://www.team.net/archive
>
--
=================================
= Never offend people with style when you =
= can offend with substance --- Sam Brown =
=================================
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|