I'd love to see the plans but am having trouble accessing you C: drive. ;-}
----- Original Message -----
From: "john niolon" <jniolon@bham.rr.com>
To: "shop-talk" <shop-talk@autox.team.net>
Sent: Wednesday, October 22, 2008 10:47 AM
Subject: [Shop-talk] bending stuff
>I LOVE bending stuff !!!
>
> here's an article on one I built... with some machinist's help... we've
> since
> added a "tight 90" adapter that is essentially a piece of 1" bar stock on
> edge
> with 1/8" plate welded on each side so it will fit over the push bar and a
> v-notch base that fits down in the base for bending light gauge stock.
> Ive
> got some more pics somewhere
>
> C:\Users\Owner\TRUCKSTUFF\tools and shop\press
> bender\presstypemetalbenderplans
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|