On Sun, Sep 14, 2008 at 01:25:38AM +0000, email@example.com wrote:
> simple, I guess: how sharp should they be?
I sharpen mine as sharp as I can considering that I use a bench grinder
and a file for the parts a grinder can't reach, and don't spend a lot of
time on it.
I don't think there's much benefit to getting out the honing stones.
I balance mine with a pencil through the hole. Side to side is fine.
> and no, the manual does not make mention of this, save to replace the blades
>when they appear worn. the manual is thus far pretty useless.
Seems to be the trend these days... consumer documentation gets
outsourced or assigned to dingbats (or both).
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list