another thought
I talked to Mohawk about my used A-7...they confirmed that I could use
synthetic (Redline) ATF instead;
so far so good;
my shop is insulated, and goes from 50-90 F when the HVAC isn't on.
ATF may be an option for other brands...ask and see if that will make it
easier for you.
PM
-----Original Message-----
From: shop-talk-bounces+paul.mele=usermail.com@autox.team.net
[mailto:shop-talk-bounces+paul.mele=usermail.com@autox.team.net] On Behalf
Of Marc
Sent: Friday, July 18, 2008 4:33 PM
To: Shop Talk List
Subject: [Shop-talk] Hydraulic fluid question
I needed a couple gallons of hydraulic fluid for my new lift. The fluid
spec'ed was "10 weight common hydraulic fluid (AW32 or AW46)".
I asked a friend to pick some up for me as he was right near the place.
What he brought me is labeled "AW Hydraulic Oil ISP 46".
Are the terms 'oil' & 'fluid' used interchangeably? Is this the right
stuff? What do I need to know?
--
Marc
smarc@smarc.net DISCLAIMER: Do not write below this line. Void
where prohibited. No postage necessary if mailed in the United States.
Batteries not included. Simulated picture. Do not use while operating a
motor vehicle or heavy equipment. May cause drowsiness. No
user-serviceable parts inside. Your cancelled check is your receipt.
Sign here without admitting guilt. No purchase necessary. Contestants
have been briefed on some questions before the show. First pull up, then
pull down. Not responsible for direct, indirect, incidental or
consequential damages resulting from any defect, error or failure to
perform. Freshest if eaten before date on carton. This supersedes all
previous notices.
You are subscribed as paul.mele@usermail.com
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|