Pete,
Have you talked to anyone at a spring shop? A decent spring shop can make
just about anything that you could want for minis to big rigs. They should
also be able to re-temper the bar, and could certainly advise you as to how
to deal with your situation. Since this appears to be a rather thorough
restoration of an unknown make vehicle, cost must be a secondary
consideration after correctness. My limited experience with spring shops
here in Sacramento leads me to believe that they might be an affordable
solution.
Hal
-----Original Message-----
From: shop-talk-bounces+hal=katemuir.com@autox.team.net
[mailto:shop-talk-bounces+hal=katemuir.com@autox.team.net]On Behalf Of
Pete Bronlund
Sent: Saturday, June 07, 2008 1:32 AM
To: shop-talk List
Subject: [Shop-talk] Car suspension repair: Concern over heat effect on
metal. What's the proper approach?
I'm needing to do a restoration repair on the front
suspension stabilizer bar from my car. One end has become
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|