--- Doug Braun <doug@dougbraun.com> wrote:
> Date: Fri, 14 Dec 2007 12:25:29 -0800 (PST)
> From: Doug Braun <doug@dougbraun.com>
> Subject: Re: [Shop-talk] Sealing A/C registers
> To: PJ McGarvey <pj_mcgarvey@hotmail.com>
>
> I have a similar problem: I want to seal off the
> louvered opening for a whole-house attic fan. I had
> assumed the frame in the upstairs hall ceiling was
> steel, and I prepared a 3' x 3' square of foam-core
> board, with a magnetic strip all the way around the
> edge. Then I realized the frame was aluminum. :-(
>
> I got a pint of this "magnetic paint" from the
> hardware store. I guess it has iron dust in it.
> I'm
> planning to paint this on the louver frame and
> topcoat
> it with white paint. Hopefully it will not look too
> ugly
> and the magnets will actually stick to it...
>
> Doug
>
>
> --- PJ McGarvey <pj_mcgarvey@hotmail.com> wrote:
>
> > Anyone bought or devised a way to seal off ceiling
> > A/C vents made of aluminum
> > - that the usual magnets won't stick to?
> >
> > PJ
> >
> >
> >
>
_________________________________________________________________
> > Don't get caught with egg on your face. Play
> > Chicktionary!
> >
>
http://club.live.com/chicktionary.aspx?icid=chick_wlhmtextlink1_dec
> > _______________________________________________
> > Support Team.Net http://www.team.net/donate.html
> >
> > You are subscribed as doug@dougbraun.com
> >
> > Shop-talk mailing list
> >
> > http://autox.team.net/mailman/listinfo/shop-talk
> >
> > http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
http://www.team.net/archive
|