I have the same motor, hanging onto it in hopes of someday making a power
hacksaw. Anybody done this, or have a favorite approach?
----- Original Message -----
From: "Jimmie Mayfield" <mayfield+shoptalk@sackheads.org>
To: <shop-talk@autox.team.net>
Sent: Friday, November 09, 2007 2:19 PM
Subject: [Shop-talk] What to do with 1/2 HP motor?
>A couple years ago I replaced my garage door opener and since the motor in
> the old one was still functional, I set it aside with the idea of using
> it for some future project. I found it again this week while cleaning out
> the garage. It's rated at 1/2HP, 1500 RPM. I don't know the motor's
> rated
> duty cycle, however.
>
> I'm open to ideas for potential shop or yard projects using this motor.
>
> Here are a few ideas I've jotted down:
>
> 1) Powering an exhaust fan. I already have one and 1/2HP is probably
> overkill anyway and the duty cycle might come into play.
> 2) Makeshift wood lathe. Seems dangerous and I don't have much interest
> in wood turning anyway so this is probably a non-starter.
> 3) Stationary disc or drum sander. Hmm. Could be useful.
>
> Any other ideas?
>
>
> Jimmie
> _______________________________________________
> shochschild@att.net
>
> Shop-talk mailing list
>
> http://autox.team.net/mailman/listinfo/shop-talk
_______________________________________________
Shop-talk mailing list
http://autox.team.net/mailman/listinfo/shop-talk
|