> It was weird though... when you pressed the valve stem from
> side to side
> it leaked _exactly_ like it would on a regular tire/wheel
> with a cracked
> (or unseated) valve stem. I can't figure out how it'd do
> that with a tube
> unless perhaps the tube or valve stem had a hole in it or something?
Just a thought ... if the wheel/tire combo was airtight otherwise, there
could be air trapped between the tire & the tube. I've not seen this
happen, but then I've never put a tube into a tubeless tire that held air.
But a leaking stem sounds more likely to me.
CONFIDENTIALITY. This electronic mail and any files transmitted with it may
contain information proprietary to NavCom Technology, Inc., or one of its
affiliates, and are intended solely for the use of the individual or entity to
whom they are addressed, shall be maintained in confidence and not disclosed to
third parties without the written consent of the sender. If you are not the
intended recipient or the person responsible for delivering the electronic mail
to the intended recipient, be advised that you have received this electronic
mail in error and that any use, dissemination, forwarding, printing, or copying
of this electronic mail is strictly prohibited. If you have received this
electronic mail in error, please immediately notify the sender by return mail.