> I have a 5.5 kw Onan generator on my motorhome which makes its output
> available for use via a 20 amp and 30 amp circuit.
> Is there a means of ganging these two outputs together so that I can
> feed a single nominal 50 amp circuit to an authorized switch
> panel which
> would power selective circuits when the commercial power is
Could be, but I'd sure want to talk to Onan first. On mine, the 110v
outlets were internally connected to make 220v.
CONFIDENTIALITY. This electronic mail and any files transmitted with it may
contain information proprietary to NavCom Technology, Inc., or one of its
affiliates, and are intended solely for the use of the individual or entity to
whom they are addressed, shall be maintained in confidence and not disclosed to
third parties without the written consent of the sender. If you are not the
intended recipient or the person responsible for delivering the electronic mail
to the intended recipient, be advised that you have received this electronic
mail in error and that any use, dissemination, forwarding, printing, or copying
of this electronic mail is strictly prohibited. If you have received this
electronic mail in error, please immediately notify the sender by return mail.