What about modifying the base of the lift to match the holes in the
concrete?
Larry Hoy
> -----Original Message-----
> From: shop-talk-owner@autox.team.net
> [mailto:shop-talk-owner@autox.team.net] On Behalf Of Eric@megageek.com
> Sent: Tuesday, December 14, 2004 6:33 AM
> To: shop-talk@autox.team.net
> Subject: Clarification on installation of lift
>
>
> OK, I've spent the last 2 nights working on installing the
> 10k lbs Bendpak Asymtrical lift in my shop.
>
> I've got 6" of 4500psi concrete. Here is the deal. I
> drilled the holes in the floor and 2 of them are off (these
> are 3/4" holes for the dropin
> bolts.) I was wondering if anyone knew if I could drill out
> the holes to maybe 1" and then using the proper grout, refill
> them with the bolts in place. Let it set for a few days,
> then torque the bolts down.
>
> Anyone know if I can do that? Thanks.
|