If you are referring to bolt extractor that looks like a socket with
flutes inside - there was write up recently in a motorcycle magazine.
They reported the Craftsman Bolt Extractor worked well.
IMO, if the bolt is merely broken (or the head ruined) but not
actually seized in place - any decent 'extractor' is likely to work.
Big IF though as, in my experience, bolts break because they are
seized in place.
Eric
----- Original Message -----
From: <eric@megageek.com>
To: <shop-talk@autox.team.net>
Sent: Saturday, June 21, 2003 10:15 AM
Subject: CM "Bolt Outs"
>
> Has anyone tried the Craftsman "Both out" set?
>
> I just saw a commercial on it and while the commercial was pretty
bad, the
> bolt outs seem like a good idea.
>
> The set is $20 for 4 or 5 bolt outs.
>
> Any Ideas?
>
>
> Inch
> http://megageek.com
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/shop-talk
|