shop-talk
[Top] [All Lists]

Re: twin feeds for wire welders

To: JNiolon@uss.com
Subject: Re: twin feeds for wire welders
From: Jim Juhas <james.f.juhas@snet.net>
Date: Sun, 09 Mar 2003 22:14:00 -0500
FWIW, I wouldn't hesitate to do this.  After all, this is inert gas at low
pressure on that side of the flowmeter.  Only the usual precautions for leaks is
what I would be concerned with.

JNiolon@uss.com wrote:

> I'm now the proud owner of two wire welders... a small 100 amp 110v hobart
> and a Millermatic 200.  I plan on keeping both of them on the same roll
> around cart with my plasma cutter and my stick machine.  The back of this
> cart has a bottle rack for the C25 mix I use for shielding gas.
>
> Is there any reason that I couldn't tee off this line after the flowmeter
> and feed both welders from the same bottle ??  I can't think of one... but
> there are lots of things I don't know ... yet...
>
> comments ???
>
> thanks
>
> john
>
> I've never completely understood anything !!!

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/shop-talk


<Prev in Thread] Current Thread [Next in Thread>