> > Well, I guess I should have clarified that, two of the screws on
> > the dashpot
> > are not removable using my snap ring pliers because they are located too
> > closely to obstructions on the carb body.
Randall's screw driver slot sounds good to me if there is vertical clearance
but first, I'd try a trick using two flat blade screwdrivers . . One with
the flat placed vertically as a fulcrum and the other levering the screw
head notches. If NEITHER idea worked, I'd get in the junk tool box and
find a suitable sized 12 point Taiwan socket and whittle on it (with a
small cut-off disc) 'til I had 3 or 6 points to fit the screw.
Tony
/// unsubscribe/change address requests to majordomo@autox.team.net or try
/// http://www.team.net/mailman/listinfo
/// Archives at http://www.team.net/archive/shop-talk
|