> I am going to build a pair of "roll around" work stands for a large scroll
> saw and a work bench drill press.
>
> The drill press is currently sitting on a 34 inch work bench and seems to be
> on the high side for me. This is a 12" Delta press and the average location
>
I also have the 12" Delta benchtop press. I built a stand for it
which is 32" high. This has worked well, and seems to be about
right (for me). I picked the height by looking at the floor mounted presses,
and seeing the chuck height on them. This works out so the chuck is
just a bit below mid chest high on me.
Joe
///
/// shop-talk@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe shop-talk
///
///
|