I'm wondering if a sanding disk is available that can be mounted
in place of the 10" blade on a table saw. It seems quite sensible
to me, but I can't seem to find such a thing in a tool catalog.
I recently received the Enco catalog thanks to some knowledgable
list member, but they don't have it either.
Perhaps one could grind the teeth off of a plywood blade and
use pressure sensitive sandpaper on one side. Or maybe a disk
could be cut out of flat steel stock without too much trouble.
Anyway, I'm too cheap to buy a table sander, and I really don't
have room for one anyway. Any thoughts about this?
Jim
=====
James A. Babcock, Software Engineer (jbabcoc@yahoo.com)
Realtime Embedded Systems Specialist pager: (703) 706-8722
'80 Triumph TR7 '87 Dodge Dakota 4x4
'99 Nissan Sentra SE '92 Honda Accord LX
Get personalized email addresses from Yahoo! Mail
http://personal.mail.yahoo.com/
///
/// shop-talk@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe shop-talk
///
///
|