Randall,
my only catalog here at work is 1995-96 but it should be similar inthe new
one
look on the page with individual sockets and buried between the 6 pt and
the 12 pt they show 6 different 1/2" sizes and
5 different 3/8" sizes.of the 8 pointers. They start at 1/4" in the 3/8"
drive so I figure they figure they don't need 1/4 drive stuff...
hope this helps... BTW i found all of mine at the flea market....dig
around a little.... they were brand new and $1.00 a piece... most folks
have very little call for them and pass them over.
john
Randall Young <ryoung@navcomtech.com> on 08/16/99 11:58:39 AM
Please respond to Randall Young <ryoung@navcomtech.com>
To: "shop-talk@autox.team.net" <shop-talk@autox.team.net>
cc: (bcc: John Niolon/Fairfield/USX)
Subject: RE: general wrench question
On Monday, August 16, 1999 5:04 AM, Doug Mitchell [SMTP:dmitchel@ford.com]
wrote:
>
> I asked Friday about 1/4 inch drive 1/4 inch 8 point
> sockets. It must just be the particular Sears/Home Depot
> stores that I go to that don't carry them. I do have
> a Sears tool catalog, and didn't see them there either,
> but must not have stared long enough.
>
> Thanks everyone for your input, I'll have to search
> harder.
Or let your mouse do the walking at http://www.sears.com/craftsman/
Randall
|