At 01:58 PM 9/19/97 -0400, you wrote:
> ..... but I think that it would be useful for removing
>things like spark plugs in tight quarters.
James,
SFM (speaking for myself), I would never run a spark plug
in or out using a power tool, especially not on alloy heads.
Too easy to strip the threads if the plug begins to bind
due to carbon or dirt. You won't notice the binding
with a power tool like you would by hand.
As for a cutoff tool stalling, I haven't had that problem
with my cheapie cutoff tool powered by 10 cfm at 90 psi.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
James S. Noe, Computer Specialist
TASC/Customer Services Branch/DCRT
National Institutes of Health
Steve_Noe@Nih.Gov 301.496.8294 (TDD)
There are 3 kinds of computer programmers:
Those who are good at math and those who aren't.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|