Hi All,
It has been a while since I posted on the site; I have been doing a frame
off restoration on my 1955 2nd series Chevy step side short bed and I 'am
almost finished with the chassis.
The emergency brake rigging is where I have run into a problem. So I am
hoping some of you can give me some ideas on what you did about the
emergency brake linkage. I have a CPP brake booster mounted in the frame and
a ididit steering column and I have also installed a Camaro rear end with
CPP rear leaf kit.
I think I have the rear part of the linkage some what figured out, but going
into the cab from the booster is still a problem.
I would like to use a foot pedal assembly instead of the OE brake handle if
I can. Has any one done this successfully?
I would love to hear what any of you all might have done to solve this
problem; any help would be greatly appreciated.
Thanks
George
1955 2nd Chevy Stepside
_______________________________________________
Oletrucks@autox.team.net
Archive: http://www.team.net/archive
|