Hey Bob
I have a dash gauge cluster for a 55 Chevy TF half ton Step side. Iam not
sure if it is the same as the GMC.
All the gages work and it is in excellent shape. I also have two front
fenders but they need some work.
Let me Know
George
55 TF Step side
-----Original Message-----
From: oletrucks-bounces@autox.team.net
[mailto:oletrucks-bounces@autox.team.net] On Behalf Of bbpanel@gmail.com
Sent: Thursday, May 06, 2010 10:22 PM
To: oletrucks@autox.team.net
Subject: Re: [Oletrucks] GMC vs Chevy TF fender question
Regarding fenders - I'm in need of a matched pair of TF fenders for my 56
Panel. Also looking for a GMC dash gauge cluster (whole dash?) to put in my
Panel. Anyone have either for sale/trade? I'm in Bakersfield, CA. Thanks.
-Bob
> -----Original Message-----
> From: oletrucks-bounces@autox.team.net
[mailto:oletrucks-bounces@autox.team.net] On
> Behalf Of Jim Krontz
> Sent: Thursday, May 06, 2010 12:26 PM
> To: 'Rob'; oletrucks@autox.team.net
> Subject: Re: [Oletrucks] GMC vs Chevy TF fender question
>
> I have a 57 3100 and purchased a 56 GMC as a donor truck. The front
fenders
> lined up pretty good. You will have to do a little modification
> (drill a few holes for the grill), but not too difficult.
>
> Picked up the GMC because the cab was in MUCH better shape than the
> 57s,
and
> then I had the added benefit of striping all the parts I needed. Then
> sold the 56 to another guy for about half of my cost. All in all, I
> was out about $700, but picked up the cab, two front fenders, and two
> rear fenders...
>
> Good luck
>
> Jim
> 57 3100
> Mesa, AZ
>
> -----Original Message-----
> From: oletrucks-bounces@autox.team.net
> [mailto:oletrucks-bounces@autox.team.net] On Behalf Of Rob
> Sent: Thursday, May 06, 2010 11:06 AM
> To: oletrucks@autox.team.net
> Subject: [Oletrucks] GMC vs Chevy TF fender question
>
> I need some input on the differences between GMC and Chevy Task Force
front
> fenders. Is there any real difference? Can you install a Chevy grill,
> specifically a '57? I have been offered a '57 GMC 1/2 ton long bed
> factory
> V8 truck for $1000 and would love to pull the GMC bumper/grill and
> dress
it
> as
> a '57 Chevy. Is it as simple as just installing the Chevy grill?
>
> Thanks,
>
> Robert
> _______________________________________________
>
> Oletrucks@autox.team.net
> Donate: http://www.team.net/donate.html Suggested annual donation
> $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/oletrucks/jim_krontz@yahoo.com
> _______________________________________________
>
> Oletrucks@autox.team.net
> Donate: http://www.team.net/donate.html Suggested annual donation
> $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/oletrucks/bbpanel@gmail.com
_______________________________________________
Oletrucks@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/oletrucks/g.perez@charter.net
_______________________________________________
Oletrucks@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|