Please provide insight on how to build a fiberglass cold air intake for my 54.
There is little room to the sides of the LT1 throttle body for an intake.
Therefore, I must turn the intake up while fishing it under the serpantine
belt and behind the electric fan. I have a form made out of florists foam
(dense green stuff). Can I lay the glass right over the foam or should I put
some sort of release agent in between. This is my first ever attempt at using
fiberglass and your wisdom is greatly appreciated.
Thanks in advance,
Rick Kremer
54 5 window - on the road but not happy
_______________________________________________
Oletrucks@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|