from page 3-15 of the Shop Manual --
Caster 1 +/- 1/2 degrees
Camber 1 +/- 1/2 degrees
Kingpin angle 7 degrees 10 minutes +/- 1 degree
Toe-In 1/16" - 3/16"
regards,
Leon
> Date: Tue, 23 Mar 2010 14:25:17 -0500
> From: Gale Gorman <gale_gorman@mac.com>
> Subject: [Oletrucks] 1954 toe in
> To: "oletrucks@autox.team.net trucks" <oletrucks@autox.team.net>
> Message-ID: <22F13B23-E360-4257-B9B3-CDBE0FC26E20@mac.com>
> Content-Type: text/plain; charset=us-ascii
>
> It's time to set the toe in on my tie rod. Does anyone have the degree to
>shoot for?
>
> 1954 3100.
_______________________________________________
Oletrucks@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|