Just a tip, before you put them back on smear a little grease or anti-seize
compount around the ceramic part of the plug, it won't be so hard to remove
next time. I've never had to use a plug wire puller --wayne
-----Original Message-----
From: oletrucks-bounces@autox.team.net
[mailto:oletrucks-bounces@autox.team.net]On Behalf Of Tom Cooper
Sent: Thursday, October 22, 2009 7:07 PM
To: oletrucks@autox.team.net
Subject: [Oletrucks] plug wire puller
What is a good plug wire puller that will get to hard to get plugs..ie on a
97 S-10 4.3. It looks like one wire on each side has a straight boot while
the other are at an angle. It is starting to get a little skip in the
mornings. This is on an old truck, hopefully this fits the list criteria.
Thanks Tom in SC
55 2nd
97 S-10
_______________________________________________
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.team.net/archive
Oletrucks@autox.team.net
http://autox.team.net/mailman/listinfo/oletrucks
|