I want to thank everyone that helped me out during the rebuilding of my '56
235. It started right up on Sunday and after some re-torquing of the manifold
and burning off of residual oil and assembly lube, purred like a kitten. No
more visale smoke, no more letters from the tailpipe emissions police!
Now for the next question - The heater on my truck was disconnected when I got
it. I've had it apart and cleaned up but now I am not sure about the hose
connections. There is one connection on the thermostat housing with a short
piece of hose that's been plugged, so I assume that is one connection.
Then there are 2 holes lower in the water pump with plugs in them. Which one
should have a connection? And does anyone now what kind of threads that hole
has so I can get a hose bip to replace the plug?
Thanks for all the help!
Bob
|