oletrucks
[Top] [All Lists]

RE: [oletrucks] pontiac engines

To: "wayne osborne" <wayne@chevytrucks.org>,
Subject: RE: [oletrucks] pontiac engines
From: "Hanlon, Bill (ISS Houston)" <Bill.Hanlon@hp.com>
Date: Tue, 30 May 2006 08:03:36 -0500
Best of my knowledge CHEVY never used Pontiac engines.  The General
Motors Truck and Coach Division used Pontiac V8s in their gasoline V8
equipped light trucks (less than 2 ton).  In 55, 56 and 57 they were
almost identical (bigger dishes in pistons for even lower compression
ratios and Bendix/Stromberg carbs) to same year Pontiacs. In 58 they
used the same block as Pontiac, but only bored it to 3.875" giving a
336.1 cubic inch engine instead of Pontiac's 370. In 59 they again used
the same block as Pontiac, but only bored it to 3.78" giving 336.9 cubic
inches instead of Pontiac's 389. Cranks, heads, rods, etc. were the same
as same year Pontiacs.



-----Original Message-----
From: owner-oletrucks@autox.team.net
[mailto:owner-oletrucks@autox.team.net] On Behalf Of wayne osborne
Sent: Sunday, May 28, 2006 10:51 AM
To: oletrucks@autox.team.net
Subject: [oletrucks] pontiac engines


Anybody know for sure the last year chevy used the GMC pontiac engines
in 
their products?  --wayne





<Prev in Thread] Current Thread [Next in Thread>