When you get your front clip, you can rebuild your calipers or use the old ones
for the core charge on a new set (that's what I've done). If there is enough
meat on the disc's and drum/disc on the rear end, getting them turned will be
fine. I would definitely rebuild or replace calipers, wheel cylinders, & master
cyl. unless you KNOW they are good. Same with brake lines. In your case you
need the MC, but I don't know how that set up will work on the fire wall. You
can make anything work with enough ingenuity, but will it look how you want? If
you get the MC and booster also get the proportioning valve from the donor car.
Steve Stuckmeyer
51 3100
St Peters, MO
---------------------------------
Relax. Yahoo! Mail virus scanning helps detect nasty viruses!
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|