Hi I am forwarding this to lListserve members hoping someone has used this
CPP front disc brake conversion kit on a 47-59 truck . CPP is closed today
and I need a little help from you. My question is below THank you Mark T
----- Original Message -----
From: Mark Treutelaar <phoneman@ticon.net>
To: wayne osborne <wayne@chevytrucks.org>
Sent: Friday, December 30, 2005 6:55 AM
Subject: Re: [oletrucks] 55-59 Chevy disc brake conversion . from CCP
> Hi Wayne . Inside the stock front hubs there are 2 pressed in cups after
> the 2 bearings and 2 races are removed Is everything removed from the
hubs
> or do these cups stay in . ?? OR do you only use the HUB casting ? Im
> hoping CPP will be open today but just incase Ill need that information so
I
> can finish the job tommorow . Thanks Mark
> ----- Original Message -----
> From: wayne osborne <wayne@chevytrucks.org>
> To: Mark Treutelaar <phoneman@ticon.net>
> Sent: Tuesday, December 27, 2005 8:22 AM
> Subject: Re: [oletrucks] 55-59 Chevy disc brake conversion . from CCP
>
>
> > The 4 bolts you removed to get the backing plate off is the same 4 holes
> > that you'll use to mount the adapter plate. Strange they forgot the
> > instructions as they're generally pretty thorough. When its time to
> install
> > the bearing adapter, I used a piece of exhaust pipe on the flat side of
> the
> > adapter to beat it on there.
> > You will not be disappointed when completed... --wayne
> >
> >
> > At 06:58 AM 12/27/2005, Mark Treutelaar wrote:
> > >The backing plate doesnt want to come off even tho all 4 bolts are out.
I
> > >bought their kit and no instructions were included
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|