Luke you can buy plastic beads and they won't hurt the metal if you move the
gun and don't hold it in one place...I have my own blasting/powdercoating
business. Hope this helps
Rick
luke zsiga <50chevy@gmail.com> wrote:
I am in the process of stripping my cab down to metal, I was going to get it
media blasted but I decided to save money and do it on my own. Now I am
stripping all the paint in the easy accessible areas with a DA sander 36
grit but my problem is under the cab and all the hard to get areas. I have a
small sand blaster and was wondering since my trucks metal is thick and
since its only going to be the bottom and corners I am getting if
sandblasting would be alright or could I buy some finer stuff for my
blaster?
Thanks for all your guys help
Luke Zsiga
Rick Kellum
5-F100's
1-57 Pick-Up
04 FX4
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|