Hello to all,
I have a question about installing new king pins. I have disassembled the
front end and removed the old king pins. I looked at a tech article from the
vendor that I purchased the king pin kit from and it states that the spindles
need to be reamed and sleeved. So here is the question . do I need to bring
the spindles to a machine shop or can I do the work myself and if so what is
the process , Or do I just press in the new bushings and king pin and call it
a day. Any help or ideas will be appreciated.
Mike Fiorenza
55 T.F panel
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|