The T-shirt participation form has been taken down, if you didn't get this
filled out do not worry this was not the official order form--that will
come during this week. I will be talking to the vendor tomorrow to narrow
down a couple items. A couple asked about a smaller logo over the breast
pocket and i'll ask bout that but I know lots of folks used the blank front
to customize themselves. I know Carl had his truck screen printed on the
front of his, i've always used the iron on transfers to put the
chevytrucks.org logo in this area. The smaller irons on works much better
that the larger ones. Be sure to practice with the iron on if you've never
used before and be sure to get it straight or you'll sacrifice a shirt.
--this is just a thought. As mentioned earlier the logo on the back is in
favor of the front so we'll go with that.
I will be putting up the official binding ordering form by mid week so
look for it to come. I will leave this up for a week or so to give all the
chance to get involved and will be giving a cut off date for ordering. As I
won't be placing the order with the vendor till the end of this cut off
period as I want to order from him the amount ordered as not to have an
inventory of these left over. As last time I ordered about 3 extra of the
most popular sizes and this worked out great as a couple folks ordered the
incorrect sizes but I had 'em covered. After the cut off date, he'll have
them printed within a few days and then the fun or organizing the shipping
will take place. I got that down fairly well also last time so should be to
much of a hassle. Anyway don't worry if you didn't get the previous form
filled out--you haven't missed a thing yet.. More to come.. --wayne
Wayne Osborne
http://www.chevytrucks.org
http://www.chevytrucks.org/wayne
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|