I'm pretty sure the Chevy and GMC heads are different, and I presume the
difference extends to the manifolds that attach to them. I once called
Patrick's and talked to Patrick himself, its probably not too hard get
information from them.
Someone bought one of the old six performance parts companies recently, I
think it was the rights and patterns for the Wayne stuff. You might want to
do some searching on the web to see if you can find them. Might be a good
source of both parts and information.
----- Original Message -----
From: "Bob KNOTTS" <raknotts@qwest.net>
To: "Jonathan Fudge" <jonfudge@mchsi.com>; <oletrucks@autox.team.net>
Sent: Saturday, November 29, 2003 7:40 AM
Subject: Re: [oletrucks] Fenton headers
Jon, you might try Patrick's
http://www.patricksantiquecars.com/chevyparts.htm or Clifford Performance.
I think they both have split manifolds for GMC. However, I just tried their
websites; They've "improved" them, and neither shows GMC parts. Chevy and
GMC engines must be the same, right?! Sure. But try contacting them. Bob K
in PHX, AZ.
----- Original Message -----
From: "Jonathan Fudge" <jonfudge@mchsi.com>
To: <oletrucks@autox.team.net>
Sent: Saturday, November 29, 2003 7:46 AM
Subject: [oletrucks] Fenton headers
> I would like to split the exhaust on my GMC 302, and have been told that
> Fenton headers will not bolt on to the GMC's, and you have to use Nicson
> headers (hard to find). Just ran across a website where the rebuild has
> Fenton's bolted on to a GMC 228 and looks like they fit perfect. Anyone
with
> experience on this modification?
>
> Thanks
> Jon
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|