I wondered.
I'll never forget when the dental profession announced that you need to use
horizontal strokes to brush your teeth instead of the up and down vertical
strokes they used to teach. I've never trusted experts since.
Doesn't mean they are wrong, but they can sure make mistakes.
----- Original Message -----
From: "Jim Wilkerson" <Jim.Wilkerson@sas.com>
To: "Steve Hanberg" <steve@oldsub.com>; <mark@noakes.com>
Cc: <oletrucks@autox.team.net>
Sent: Tuesday, September 23, 2003 12:40 PM
Subject: RE: [oletrucks] Old Tire Sizes
A quick (and unscientific) search on radial tire rotation resulted in a
general consensus that cross-rotation of radial tires is OK and even
recommended by some manufacturers. Here is a typical comment:
http://www.chicagolandmgclub.com/techtips/532.html
***********************************************************************
Jim Wilkerson
***********************************************************************
-----Original Message-----
From: Steve Hanberg [mailto:steve@oldsub.com]
Sent: Tuesday, September 23, 2003 12:46 PM
To: mark@noakes.com
Cc: oletrucks@autox.team.net
Subject: Re: [oletrucks] Old Tire Sizes
Or perhaps you were corrected by someone who didn't know what they were
talking about, or maybe it never really made any difference in the first
place...
The so-called experts can't all be right, given how much of the time they
disagree on things!
----- Original Message -----
From: <mark@noakes.com>
To: <Jim.Wilkerson@sas.com>
Cc: <steve@oldsub.com>; <oletrucks@autox.team.net>
Sent: Tuesday, September 23, 2003 10:44 AM
Subject: RE: [oletrucks] Old Tire Sizes
I remember saying the same thing a while back and being corrected on it.
Apparently radial tire technology is now to the point that you don't have to
keep the direction of rotation the same any more.
Having said that, my 86 Chevy truck manual says to keep them the same as
does my 86 Corvette manual and my wife's 97 Jeep manual. (Most vette tires
are directional anyway.)
So either radial technology that doesn't care about direction is a fairly
recent development or the car manufacturers aren't listening to the tire
manufacturers.
Mark Noakes
On Tue, 23 Sep 2003 11:50:42 -0400, "Jim Wilkerson" wrote:
>
> I agree it would be best to have the same size. What are the
recommendations for tire
> rotation nowadays? For example, could I rotate the spare into the
> regular
rotation or
> do right-side tires have to stay on the right side and vice versa?
> Seems
like I read
> somewhere that the direction of rotation has to stay the same.
>
> **********************************************************************
> *
> Jim Wilkerson
> ***********************************************************************
>
>
> -----Original Message-----
> From: Steve Hanberg [mailto:steve@oldsub.com]
> Sent: Tuesday, September 23, 2003 10:22 AM
> To: Jim Wilkerson; oletrucks@autox.team.net
> Subject: Re: [oletrucks] Old Tire Sizes
>
>
> You might want to check with the manufacturer to see how much
> difference
is
acceptable.
> I have an all-wheel drive car, and there is a specification regarding
> how
close to
> identical the diameter of each tire must be.
>
> But since you've only got two driven wheels, an spare that doesn't
> match
the rears
could
> always be put on the front, and one of the fronts moved to the rear,
> in a
pinch.
>
> Probably better to have the right size spare...
>
> ----- Original Message -----
> From: "wayne osborne" <wayne@chevytrucks.org>
> To: "Jim Wilkerson" <Jim.Wilkerson@sas.com>; "Gary Perry"
<glperry@fwi.com>;
> <oletrucks@autox.team.net>
> Sent: Tuesday, September 23, 2003 5:53 AM
> Subject: RE: [oletrucks] Old Tire Sizes
>
>
> Jim,
> Seems to me the rule of thumb should be to use the same diameter
> tire
for a spare
> regarding a posi rear. Might be hard on the clutch pack in a limited
> slip
to run any
> distance with mismatched set. A true posi, where there is no slip
> wouldn't
be able to
> handle it very long as you'd probably bust an axle or the differential
before long. I
> would personally get the same diameter for a spare.--wayne
>
>
> At 02:49 PM 9/22/03 -0400, Jim Wilkerson wrote:
> >Thanks Gary! And Thanks to Bob Chansler also. According to a tire
> >size calculator I found the closest to the original 6.50 x 16 is a
> >P215R80 - 16
> .
> >
> >What is the 'rule of thumb' for vehicles with positraction and
> >running different size wheel/tire combos on the rear? For example,
> >is it absolutely necessary that the spare tire is exactly the same
> >diameter as the regular tires? The same circumference? Or is it OK
> >to run a completely different size - for short distances? If yes,
> >what is a short distance?
> >
> >Thanks in advance!
> >
> >*********************************************************************
> >**
> >Jim Wilkerson
> >***********************************************************************
> >
> >
> >-----Original Message-----
> >From: Gary Perry [mailto:glperry@fwi.com]
> >Sent: Monday, September 22, 2003 1:38 PM
> >To: Jim Wilkerson; oletrucks@autox.team.net
> >Subject: Re: [oletrucks] Old Tire Sizes
> >
> >
> >I don't know for sure, but think you need 80 or 85 series tire to be
> >that tall. Also think only a 195 or such narrow tire to stay orig
> >looking. Myself would get wider and smaller diameter, probly for
> >better ride. Speedo may be off, but So What, I say!
> >
> >G. L. Grumpy's
> >Old Iron Ranch
> >Huntington, IN 46750
> >AD trucks and MM tractors
> >----- Original Message -----
> >From: "Jim Wilkerson" <Jim.Wilkerson@sas.com>
> >To: <oletrucks@autox.team.net>
> >Sent: Monday, September 22, 2003 12:19 PM
> >Subject: [oletrucks] Old Tire Sizes
> >
> >
> > > Does anyone know what the modern tire size equivalent would be for
> > > the
> >original 6.50 x 16 tires that came on the '53 Chevy AD trucks?
> >Assuming a radial, I want a tire with the same diameter and
> >approximately the same width. i.e. P205R70 -16 or LT20575-16 or
> >????
> > >
> > > Thanks.
> > >
> > > ******************************************************************
> > > **
> > > **
> > > *
> > > Jim Wilkerson
> > >
***********************************************************************
> > > oletrucks is devoted to Chevy and GM trucks built between 1941 and
1959
> >oletrucks is devoted to Chevy and GM trucks built between 1941 and
> >1959
>
> Wayne Osborne
> http://www.chevytrucks.org
> http://www.chevytrucks.org/wayne
> oletrucks is devoted to Chevy and GM trucks built between 1941 and
> 1959 oletrucks is devoted to Chevy and GM trucks built between 1941
> and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|