oletrucks
[Top] [All Lists]

Re: [oletrucks] Window Trim

To: "Hanlon, Bill \(ISS Houston\)" <bill.hanlon@hp.com>,
Subject: Re: [oletrucks] Window Trim
From: "Doug Pewterbaugh" <dpewter@email.msn.com>
Date: Wed, 25 Jun 2003 14:36:37 -0500
Thanks for the correction, I knew that, but overlooked in response.

Regards,
Doug Pewterbaugh
dpewter@msn.com
Denton, TX
49 3104 216 5-window

Want to make money whenever someone uses their VISA or MasterCard?
www.consumer1st.com/116540/
----- Original Message -----
From: "Hanlon, Bill (ISS Houston)" <bill.hanlon@hp.com>
To: "Doug Pewterbaugh" <dpewter@email.msn.com>; "Darrel Bunge"
<dbunge@attbi.com>; "Oletrucks (E-mail)" <oletrucks@autox.team.net>
Sent: Wednesday, June 25, 2003 2:09 PM
Subject: RE: [oletrucks] Window Trim


I don't know about the AD trucks, but on the TF trucks that "chrome" window
trim is actually stainless steel.

-----Original Message-----
From: Doug Pewterbaugh [mailto:dpewter@email.msn.com]
Sent: Wednesday, June 25, 2003 1:29 PM
To: Darrel Bunge; Oletrucks (E-mail)
Subject: Re: [oletrucks] Window Trim


Chrome windshield trim was on the custom cabs (typically 5 window), but the
corner & rear windows didn't have anything more than the black rubber.  NOW,
you CAN use a chromed plastic locking bead for those windows, but that is
not stock (bead is available at most aftermarket sources).  Inside
windshield molding will have to come from another old truck.  Check with
some of the vendors that deal with used parts.  See
http://www.chevytrucks.org/resources/vendors.htm

Regards,
Doug Pewterbaugh
dpewter@msn.com
Denton, TX
49 3104 216 5-window

Want to make money whenever someone uses their VISA or MasterCard?
www.consumer1st.com/116540/
----- Original Message -----
From: "Darrel Bunge" <dbunge@attbi.com>
To: "Oletrucks (E-mail)" <oletrucks@autox.team.net>
Sent: Wednesday, June 25, 2003 11:33 AM
Subject: [oletrucks] Window Trim


> I'm looking for chrome windshield trim for a 1947-53 3100.  Also need the
> corner window and rear window chrome trim.  Finally, I need the inside
> windshield molding.  Anyone have any ideas where to acquire?  I had my
truck
> at Back to the Fifties the past weekend in St. Paul and maybe saw some of
> your trucks there.  Had a lot of inquiries about my truck from other
> builders and referred them to this site for future assistance.
>
> Darrel Bunge
> 1947 A.D.
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>