oletrucks
[Top] [All Lists]

RE: [oletrucks] special tool ?

To: "Duff Karen ES-19 103 FW/EM" <Karen.Duff@ctbrad.ang.af.mil>,
Subject: RE: [oletrucks] special tool ?
From: "Bruce Gyger" <bruce@destinationseattle.com>
Date: Wed, 28 May 2003 08:01:43 -0700
Clutch drive screw drivers.  RB's Obsolete has them also.  I bought two sets
then cut and ground one set down to use in my cordless.

Bruce Gyger
'55 2nd 3600

-----Original Message-----
From: owner-oletrucks@autox.team.net
[mailto:owner-oletrucks@autox.team.net]On Behalf Of Duff Karen ES-19 103
FW/EM
Sent: Tuesday, May 20, 2003 8:24 AM
To: Oldchevytrucks (E-mail); oletrucks (E-mail)
Subject: [oletrucks] special tool ?


Twice so far I've come up with a need for a special type of
"screwdriver"....I've seen in on the hood latch plate on my truck, and the
plate on the floor at the  bottom of the steering column.  Some type of hex
thing, looks oval with two points in the middle, maybe better described like
the number 8 but with the middle part of the 8 erased.  Is this a special
order tool, or can i find it at NAPA...and what is it called so I don't
sound so silly the next time I ask about it.

Karen Duff
53 3100
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>