Karen
Those screws you are speaking of are called Clutch Drive , you can only get
a set of screw drivers from Carters or Chevy Duty that I know of. You used
to be able to get the sockets with these tips, but I have not been able to
locate any lately. So I now discard these screws and replace with Philips or
hex bolts in protest of the tool industry not supporting the restoration
business.
Lee
----- Original Message -----
From: "Duff Karen ES-19 103 FW/EM" <Karen.Duff@ctbrad.ang.af.mil>
To: "Oldchevytrucks (E-mail)" <old-chevy-truck@yahoogroups.com>; "oletrucks
(E-mail)" <oletrucks@autox.team.net>
Sent: Tuesday, May 20, 2003 8:23 AM
Subject: [oletrucks] special tool ?
> Twice so far I've come up with a need for a special type of
> "screwdriver"....I've seen in on the hood latch plate on my truck, and the
> plate on the floor at the bottom of the steering column. Some type of
hex
> thing, looks oval with two points in the middle, maybe better described
like
> the number 8 but with the middle part of the 8 erased. Is this a special
> order tool, or can i find it at NAPA...and what is it called so I don't
> sound so silly the next time I ask about it.
>
> Karen Duff
> 53 3100
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|