Jim,
Sorry--dont have same for the AD trucks--On the tech page at
http://www.chevytrucks.org is how to adjust the hood on an AD truck--about
as close as I can get now. If anyone has the instructions for adjusting the
AD doors--send it my way and i'll post in on the tech section as well...
--wayne
At 10:52 AM 4/14/03 -0400, you wrote:
>Is there a similar set of pics and instructions for adjusting the AD truck
>doors? (47- 54)
>
>***********************************************************************
>Jim Wilkerson
>***********************************************************************
>
>
>-----Original Message-----
>From: Blaine & Maggie Dumkee [mailto:bmdumkee@auroranet.nt.ca]
>Sent: Saturday, April 12, 2003 11:00 PM
>To: SurfDudeSC@aol.com; oletrucks@autox.team.net
>Subject: RE: [oletrucks] door ajustment/alignment question
>
>
>Here is a post from Wayne Osborne from last fall. I hope it helps.
>
>
>
>So here is there door alignment procedure from their catalog...
>http://www.chevytrucks.org/temp/door_alignment.jpg
>http://www.chevytrucks.org/temp/door_alignment1.jpg
>http://www.chevytrucks.org/temp/door_alignment2.jpg
>
>The alignment procedures comes straight from the shop manual... ---wayne
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>-----Original Message-----
>From: owner-oletrucks@autox.team.net
>[mailto:owner-oletrucks@autox.team.net]On Behalf Of SurfDudeSC@aol.com
>Sent: Saturday, April 12, 2003 12:05 PM
>To: oletrucks@autox.team.net
>Subject: [oletrucks] door ajustment/alignment question
>
>
>Hi group;
>I'm having a problem getting the drivers side door, specifically the upper
>left "corner" area near the cowl. Problem is I have the hinge holes
>adjusted all the way "out" but the door "corner" will not come out far
>enough with the cab to be flush. Furthermore, the front of the door edge
>strikes and binds on the fender. Any suggestions would be
>appreciated. Thanks. David 57 GMC 1/2 ton oletrucks is devoted to Chevy
>and GM trucks built between 1941 and 1959 oletrucks is devoted to Chevy
>and GM trucks built between 1941 and 1959
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
Wayne Osborne
http://www.chevytrucks.org
http://www.chevytrucks.org/wayne
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|