| To: | 64bowtie@quik.com (Devin Timmons) |
|---|---|
| Subject: | Re: [oletrucks] gen to alt wiring |
| From: | Tom3600@webtv.net |
| Date: | Sat, 12 Apr 2003 13:40:31 -0400 (EDT) |
Devin ~ If you have a GM "one wire" alternator you just run the wire to the "BATT" terminal on your voltage regulator and then just tape off the other wires on the regulator and then discard it. If you go to http://www.inliners.org and click on "tech tips" scroll down to 12V conversion using an alternator for more info. If you ave any questions get back to me. Tom oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959 |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [oletrucks] Oil Filter Cover, Bobby D Keeland |
|---|---|
| Next by Date: | [oletrucks] door ajustment/alignment question, SurfDudeSC |
| Previous by Thread: | [oletrucks] gen to alt wiring, Devin Timmons |
| Next by Thread: | Re: [oletrucks] gen to alt wiring, John Melon |
| Indexes: | [Date] [Thread] [Top] [All Lists] |