I am attempting to put together this new bed but unsure how the front
crossmember (the one that bolts to your bedfront) is attached the bed front is
drilled with holes but need a good picture before I drill all the holes in the
generic crossmembers (The front and next 2 on a 1/2T bed are identical) I
bought. Not the holes for the bed wood but the ones that bolt to the bed
front. It may actually look like a part of the bed front but is a
crossmember.
If you look from under the bed up the inside of the front panel you see the
first crossmember which supports the bedwood at the bed front, this is
attached to the bed front by a bunch of 1/4" x 3/4" bolts along the bottom of
the bedfront.
Please send the pictures to me offlist at jonkunkel@attbi.com
Thanks
Jon
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|