I ended up cutting out a section in the middle (cutting it close to the
frame rails). How come you had to modify the floor board? After I removed
the crossmember the transmission has about 1" of room from the very front
of the floorboard (closest part).
>From: dlikearock@aol.com
>To: kmm1024@hotmail.com
>Subject: Re: [oletrucks] 700R4 with rear engine crossmember
>Date: Sat, 28 Sep 2002 08:59:09 EDT
>
><PRE>I have a 1954 pickup and I had to take out the crossmember and
>replace it
>with one from wwwbrotherstrucks.com. I also had to modify the floor board.
_________________________________________________________________
MSN Photos is the easiest way to share and print your photos:
http://photos.msn.com/support/worldwide.aspx
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|