Mike
I think what your are talking about might be the Vacuum advance and mixure
adjustment I can send you a picture of a stock one if you like?
HooT58
----- Original Message -----
From: "Michael E. Mendonga" <mm@service-quality.com>
To: "Oletrucks" <oletrucks@autox.team.net>
Sent: Wednesday, August 14, 2002 9:57 AM
Subject: [oletrucks] Rochester Carb Question
> I'm sooo close to firing up my "period enhanced" 235 on my '54. I've got
> an Offey dual intake with 216 carbs, Fenton headers and Flowmaster
mufflers.
> I need help on the two threaded holes (one about 1/8 inch and the other
> about 5/16 inch) on the back of the throttle bodies (carb bases) that have
> tiny holes into the throttle body. I know that these are for vacuums, but
> are they both for vacuums? Can I plug one of them (i.e. the smaller one)
> or do I need to run two vacuum lines and then split each of them into
their
> respective carbs?
>
> Thanks for the help.
>
> Michael
> '54 Chevy 3100
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|