Ron,
Try a flex-a-lite fan part #1080 for stainless or 1018 for aluminum(sp?)
NAPA part # for the same respectively are 823-1259 and 823-1252. You will
also need a 1/2 spacer. The clearance for this fan is about 1/4 in from the
harmonic balancer and about 1/2 inch from the radiator. :)
Durwood
>From: Ronald Smiley <smilin_ron@yahoo.com>
>Reply-To: Ronald Smiley <smilin_ron@yahoo.com>
>To: oletrucks <oletrucks@autox.team.net>
>Subject: [oletrucks] Radiator fan
>Date: Mon, 10 Jun 2002 17:35:21 -0700 (PDT)
>
>List: What is being used for a radiator fan to go on
>a short shaft water pump? The one from the 216 and
>the one off of a 54 235, are similar and will not
>work. The shaft in the new pump looks to be five
>eights inch in diameter and the mounting holes are one
>and a quarter inch on centers. Thanks for any help.
>Ron
>53 3100
>Yahoo! - Official partner of 2002 FIFA World Cup
>http://fifaworldcup.yahoo.com
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
Durwood
51 Chevy 1/2 ton Deluxe 5 window
_________________________________________________________________
Join the worlds largest e-mail service with MSN Hotmail.
http://www.hotmail.com
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|